E-Techs (Personnel and Training)
Recruitment for Aviation – E-Learning for all

Telephone: +44(0) 1284 700676
Email: info@e-techs.co 
Website: www.e-techs.co
Address: Unit 12 Park Farm Business Centre, Fornham Park, Fornham St Genevieve,
Bury St. Edmunds, Suffolk, IP28 6TS, United Kingdom

If you are looking for - Fuel Tank Safety Training, SFAR 88 Fuel Tank Safety Training, Mandatory Training in Aviation, Required Training in Aviation, Aviation Human Factors Training, EWIS Training for Groups 3-8.

E-Techs provides an on-line solution with EASA approved training for Aviation Personnel in Aviation Human Factors, Fuel Tank Safety and EWIS (groups 3-8).  With the E-Learning method you can significantly reduce aviation training costs compared to traditional classroom training as there are no travel costs, no fees for on-site tutors and remote and flexible learning keeps the productivity down-time to a minimum.

The courses are internet based and include photos, diagrams, quiz questions and a final multi-choice exam (except for FTS phase one has no exam). Each course complies with EASA part 145.A.30 acceptable means of compliance and guidance material. The courses are quality approved by our UK CAA part 145.01263.

Courses are accessed via our website www.e-techs.co.  Once purchased the course notes remain available to study for a period of up to 90 days.  The cost includes a final examination/assessment. The examination questions are multiple-choice and once the pass mark of 75% is achieved your unique certificate is downloadable immediately. If the pass mark is not achieved the first time, you are able to refer back to the notes to revise and re-take the examination as many times as required (within 90 days).

Aviation Training News

E-Techs has carefully crafted a range of online initial and continuation EWIS E-Learning courses for groups 3 through to 8 to ensure you comply with AMC 20-22
AMC 20-22 states, all maintenance personnel need to be aware that aeroplane Electrical Wiring and Interconnections Systems (EWIS) should be maintained with the same level of intensity as any other system in the aircraft. The objective of this EWIS training programme is to ensure that proper procedures, methods, techniques and practices are used when performing maintenance, preventive maintenance, inspection, alteration and cleaning of EWIS

Aviation E-Learning Courses Available Now On-line

HUMAN FACTORS IN AVIATION (INITIAL)
HUMAN FACTORS IN AVIATION (CONTINUATION)
These courses are for users within an aircraft maintenance organisation. The continuation course is for those who have already taken the initial Human Factors in Aviation training program and require ‘refresher’ training in Human Factors.

FUEL TANK SAFETY TRAINING PHASE 1
This course is for those within an aircraft maintenance organisation representing the maintenance management structure, the quality manager and staff required to quality monitor the organisation (as stated in EASA Decisions 2009/006/R & 2009/007/R)..

FUEL TANK SAFETY TRAINING PHASE 1 & 2 This course is for those personnel within an aircraft maintenance organisation required to plan, perform, supervise, inspect and certify the maintenance of aircraft and fuel system components (as stated in EASA Decisions 2009/006/R & 2009/007/R)

AVIATION HUMAN FACTORS (INITIAL) WITH FUEL TANK SAFETY TRAINING PHASE 1 & 2
AVIATION HUMAN FACTORS (CONTINUATION) WITH FUEL TANK SAFETY TRAINING PHASE 1 & 2
These cost effective, combination course packages include Aviation Human Factors & Fuel Tank Safety Training 1 & 2 courses.

EWIS Training

The EWIS programme was developed for eight different target groups and may be used for the minimum requirements for initial and recurrent training. Depending on the duties, some may fall into more than one target group and, therefore, must fulfill all objectives of the associated target groups.

The initial courses are for those who have had no previous training in EWIS. The continuation courses are for those who have already taken the initial EWIS training program and require ‘refresher’ training.
Once initial training has been completed, user are required to update their training with a Group 4 EWIS - Continuation training course every 24 months

AVIATION GROUP 3 EWIS (INITIAL)
AVIATION GROUP 3 EWIS (CONTINUATION)
These courses are for qualified staff performing electrical / avionic engineering on in-service aeroplane i.e. personnel who are authorised to design EWIS installations and / or make modifications and repairs to (e.g. electric / avionic engineers).

AVIATION GROUP 4 EWIS (INITIAL)
AVIATION GROUP 4 EWIS (CONTINUATION)
These courses are for qualified staff performing general maintenance / inspections not involving wire maintenance (LRU change is not considered wire maintenance) i.e. personnel who perform maintenance on aeroplane that may require removal / reconnection of electrical connective devices (e.g. inspectors / technicians cat A or B1).

AVIATION GROUP 5 EWIS (INITIAL)
AVIATION GROUP 5 EWIS (CONTINUATION)
These courses are for qualified staff performing other engineering or planning work on in-service aeroplane i.e. personnel who are authorised to design mechanical / structure systems installations, modifications and repairs, or personnel who are authorised to plan maintenance tasks.

AVIATION GROUP 6 7 & 8 EWIS (INITIAL)
AVIATION GROUP 6 7 & 8 EWIS (CONTINUATION)
These courses are for service staff with duties in proximity to EWIS i.e. personnel whose duties would bring them into contact / view of aeroplane wiring systems. This would include, but not be limited to: aeroplane cleaners, cargo loaders, fuelers, lavatory servicing personnel, de-icing personnel, push back personnel, flight deck crew (e.g. pilots and flight engineers) and cabin crew.